3 in. Air Pneumatic Cut-Off Tool with Metal Safety Guard by Steelman

The Steelman 1526A Cut-Off Tool with Metal Guard is an ideal tool when the job facing you requires heavy-duty cutting power. With a maximum free run speed of 20,000 RPM this pneumatic tool will slice through metal stock, rebar, bolts, pipes and straps faster than any hacksaw ever could. When not in use a safety trigger lock on the lever style tease-trigger prevents against accidental startups yet won’t impair easy use and a chrome plated protective guard keeps you safe from flying debris and sparks during use. You don’t have to worry about the exhaust blowing debris and shavings across the work area either as this grinding cutter redirects the exhaust back away from the cutting area. The built-in regulator allows for variable speed control through the trigger and operates on a mere 4 cu. ft. per minute of 90 psi compressed air. Threaded to accept a conventional 1/4 in. NPT air inlet to connect it to a 3/8 in. air hose this tool is compact at only 8 in. L and weighing 1.85 lbs.

• Ideal cutting tool – ideal tool for cutting through pipe and tubing, rebar, sheet metal, nuts and bolts
• Safety trigger lock – safety trigger lock secures against accidental startup without impairing easy use
• Redirected exhaust – exhaust is redirected away from operator and work area
• Protective guard – chrome plated guard protects you from flying debris and sparks during use
• Free speed – free running speed maximum is 20,000 RPM
• Variable speed throttle – variable speed throttle for positive speed control via lever style tease trigger
• Built-in regulator – built-in regulator for consistent, even air pressure to the air motor
• Low air demand – operates on a mere 4 cu. ft. per minute of 90 psi compressed air